top of page
Search

Shower Rough-In: The Measurements That Matter

apexflowplumberon
5d
1 min read

Getting the rough-in right is what makes a shower look good and work well. Here are the key decisions, with common examples.


Drain position

For a pre-formed base, the drain must match the base's drain opening exactly. For tiled floors, a centre or linear drain is placed to suit the slope.


Valve height

Many installers place the shower valve somewhere around 40 to 48 inches above the floor, comfortable for most adults. For a tub-shower combo, the valve is often lower.


Shower head height

A common shower head arm height is around 78 to 84 inches above the floor. Taller households may want it higher.


Valve depth

The valve body must sit at the right depth in the wall for the finished tile thickness, or the trim will not fit. Most valves include a plaster guard showing the allowed range.


Handheld showers

A slide bar needs solid blocking behind the wall.


Niches and benches

Plan recessed niches so they do not conflict with pipes.


Blocking for grab bars

Add backing now, even if grab bars come later.


Always confirm with your fixture's instructions. Learn more about shower installation.

 
 
 

Comments


bottom of page